Vibra-TITE MP 5430

Harmonization Code : 3403.19 | Lubricating Preparations (With 70% or More Petroleum Oils) For Automotive and Other Uses

Vibra-TITE MP 5430

Main features

  • Easy 1:1 Meter-Mix Dispensing
  • Fast 20- to 30-Minute Handling Cure
  • High-Strength Epoxy Bonding

Product Description

H.B. Fuller MP-5430 is a two-component, unfilled epoxy structural adhesive formulated at a 1:1 volume ratio for cartridge, meter-mix, or static-mix dispensing. The clear, free-flowing system reaches handling cure in 20 to 30 minutes at room temperature and full cure in 24 hours at 23 deg C. Typical cured properties include 48.3 MPa tensile strength, 80 Shore D hardness, and 15.9 MPa overlap shear strength on acid-etched aluminum at 25 deg C and 50% RH. MP5430 bonds metals, ceramics, and most plastics for structural assembly applications.

Key features

  • Easy 1:1 Meter-Mix Processing: Equal-volume mixing suits dual cartridges, meter-mix equipment, and static-mix application.
  • Fast Handling Cure: Handling cure is normally reached in 20 to 30 minutes, with full cure in 24 hours at 23 deg C.
  • Cured Structural Properties: Typical tensile strength is 48.3 MPa and hardness is 80 Shore D under the specified ASTM test methods.

Applications

Structural bonding of metals, ceramics, and most plastics.

Product Family

VIBRA-TITE MP-5430

Loading pricing…
TDS, SDS & Technical Documents

Technical Specifications

General Properties
Appearance
Appearance at room temperature.
Clear
Chemistry Type
Epoxy
Mix Ratio
The amount of a constituent divided by the total amount of all other constituents in a mixture
1:1
Specific Gravity
Specific gravity (SG) is the ratio of the density of a substance to the density of a reference substance; equivalently, it is the ratio of the mass of a substance to the mass of a reference substance for the same given volume. For liquids, the reference substance is almost always water (1), while for gases, it is air (1.18) at room temperature. Specific gravity is unitless.
1.16/1.15
Physical Properties
Viscosity (Part A)
12,000 mPa.s
Viscosity (Part B)
13,000 mPa.s

Additional Information

Technical properties

As-supplied / before-processing properties

Values distinguish Part A, Part B, and the mixed 1:1 adhesive system where stated.

PropertyValueUnitMethod / condition
Viscosity - Part A12,000cPs25 deg C; typical value
Viscosity - Part B13,000cPs25 deg C; typical value
Viscosity - mixed12,500cPs25 deg C; typical value
Volume mix ratio1 to 1RatioPart A to Part B
Weight mix ratio1 to 1RatioPart A to Part B
Pot life20 to 30min25 deg C; 20 g; typical value
Full cure24h23 deg C
Technical properties

Final-state properties

Final-state values apply to the cured adhesive under the stated methods and conditions.

PropertyValueUnitMethod / condition
Hardness80Shore DASTM D2240; typical cured value
Tensile strength48.3MPaASTM D638; typical cured value
Elongation at break3 to 5%ASTM D638; typical cured value
Overlap shear strength15.9MPaASTM D1002; acid-etched aluminum; 25 deg C; 50% RH
Operating temperature-40 to 130deg CCured adhesive range
Dielectric strength16.1kV/mmASTM D149; typical cured value
Volume resistivity8 E 14ohm cmASTM D257; typical cured value

Leading Brands Trust in Our Products and Services

Products that Perform| Knowledge that Serves| Service that Delivers