LORD 506/17

Harmonization Code : 3506.10.00.00 | Prepared glues and other prepared adhesives, not elsewhere specified or included; products suitable for use as glues or adhesives, put up for retail sale as glues or adhesives, not exceeding a net weight of 1 kg

LORD 506/17

Main features

  • 8-12 Minute Handling Strength
  • 10:1 Accelerator 17 Volume Mix
  • -40 to 149 deg C Temperature Range

Product Description

LORD 506/Accelerator 17 is a two-part, semi-flexible acrylic adhesive system for bonding thermoplastics, thermosets and prepared metals. LORD 506 is a colorless-to-amber liquid with typical viscosity of 20,000-70,000 cP at 25 deg C. With Accelerator 17, the system uses a 10:1 volume ratio, provides a 4-6 minute working time, and reaches handling strength in 8-12 minutes at 24 deg C. Complete cure takes 24 hours at room temperature. The cured system is used from -40 to 149 deg C and accommodates shock and sudden stress loading.

Key features

  • System Mixing: LORD 506 and Accelerator 17 use a 10:1 adhesive-to-accelerator ratio by volume.
  • Assembly Handling: The mixed system reaches handling strength in 8 to 12 minutes at 24 deg C.
  • Semi-Flexible Response: The cured adhesive accommodates shock and sudden stress loading.

Applications

ABS, acrylic, polycarbonate, FRP, prepared metals, urethane, phenolic, polysulfone and vinyl.

Product Family

LORD 506/17

Loading pricing…
TDS, SDS & Technical Documents

Technical Specifications

General Properties
Appearance
Appearance at room temperature.
Colorless to Amber Liquid
Density
Volumetric mass per unit
989 -1036 kg/m3
Mix Ratio
The amount of a constituent divided by the total amount of all other constituents in a mixture
10:1
Solids
100 %
Physical Properties
Viscosity
Viscosity is a measurement of a fluid’s resistance to flow. Viscosity is commonly measured in centiPoise (cP). One cP is defined as the viscosity of water and all other viscosities are derived from this base. MPa is another common unit with a 1:1 conversion to cP. A product like honey would have a much higher viscosity -around 10,000 cPs- compared to water. As a result, honey would flow much slower out of a tipped glass than water would. The viscosity of a material can be decreased with an increase in temperature in order to better suit an application
20,000 - 70,000 mPa.s

Additional Information

Technical properties

As-supplied / before-processing properties

Component values apply to LORD 506; mix and timing values apply specifically to the LORD 506/Accelerator 17 system.

PropertyValueUnitMethod / condition
LORD 506 viscosity20,000-70,000cPTypical; Brookfield HBT, spindle 3, 5 rpm; 25 deg C
LORD 506 density989-1,036kg/m3Typical
Flash point, closed cup11deg CTypical; LORD 506 component
Mix ratio10:1by volumeLORD 506 adhesive to Accelerator 17
Solids content100%Typical; mixed system
Working time4-6minutesTypical; mixed system at 24 deg C
Time to handling strength8-12minutesTypical; mixed system at 24 deg C; 100 psi endpoint
Shelf life6monthsOriginal unopened container below 27 deg C

Leading Brands Trust in Our Products and Services

Products that Perform| Knowledge that Serves| Service that Delivers