LOCTITE EA 7363
Harmonization Code : 3506.91.90.99 | Prepared glues and other prepared adhesives, not elsewhere specified or included; products suitable for use as glues or adhesives, put up for retail sale as glues or adhesives, not exceeding a net weight of 1 kg ; Adhesives based on polymers of headings 3901 to 3913 or on rubber; Other ; Other
Main features
- Non-Sag Anchor-Hole Application
- 20-Minute Anchor Placement Window
- Seismic Anchoring and Grouting
Product Description
LOCTITE EA 7363 is a two-component, 100% solids epoxy anchoring grout for securing threaded rod, bolts, rebar, and dowels in concrete, grout-filled block, and other non-reinforced masonry. Resin and hardener mix 1:1 by volume to form a grey, non-sag paste with a 20-minute working time at 25 deg C. The material cures at room temperature, with a 4-hour cure time at 25 deg C. Typical cured compressive strength at yield is 79 N/mm^2 after a 7-day cure at 24 deg C. Applications include seismic anchoring and bracing plus grouting dowel and tie bars in concrete repair.
Key features
- Equal-Volume Epoxy Mixing: Resin and hardener mix 1:1 by volume.
- Non-Sag Anchor Placement: The mixed grey paste has a non-sag consistency for anchor-hole application.
- Anchor-Placement Working Time: Mixed material has a 20-minute working time at 25 deg C.
Applications
Anchoring threaded rod, bolts, rebar, and dowels; seismic anchoring and bracing; grouting in concrete, block, and masonry substrates.
TDS, SDS & Technical Documents
Technical Specifications
General Properties
Mechanical Properties
Other Properties
Chemical Properties
Additional Information
As-supplied / before-processing properties
| Property | Value | Unit | Method / condition |
|---|---|---|---|
| Resin density | 1.14 to 1.4 | g/ml | 25 deg C; LMS |
| Hardener density | 0.87 to 1.06 | g/ml | 25 deg C; LMS |
| Resin viscosity | 115,000 to 125,000 | mPa s | Brookfield, 25 deg C; LMS |
| Hardener viscosity | 160,000 to 190,000 | mPa s | Brookfield, 25 deg C; LMS |
| Mix ratio | 1:1 | Resin : hardener, by volume | |
| Mix ratio | 100:80 | Resin : hardener, by weight | |
| Working time | 20 | min | Mixed material, 25 deg C |
After-processing / final-state properties
| Property | Value | Unit | Method / condition |
|---|---|---|---|
| Compressive strength at yield | 79 | N/mm^2 | ASTM D695; cured 7 days at 24 deg C; tested at 24 deg C |
| Tensile strength | 21 | N/mm^2 | ASTM D638; cured 7 days at 24 deg C; tested at 24 deg C |
| Elongation at failure | 3.3 | % | ASTM D638; cured 7 days at 24 deg C; tested at 24 deg C |
| Water absorption | 0.5 | % | ASTM D570; cured 7 days at 24 deg C |
| Linear shrinkage | 0.2 | % | ASTM D2566; cured 7 days at 24 deg C |
| Bond strength | 25 | N/mm^2 | ASTM C882; cured 2 days at 24 deg C; tested at 24 deg C |
